MX5\Miata Coil on plug kit (ready built) 1.8 (UC)

SKU 00008
£150
In stock
1
Product Details

MX5 Coil on Plug Kit (Pre-wired)

Are you building a Turbo or Supercharged MX5, if so then our Coil over plug kit is for you!
This kit paired with a standalone ECU like ME221/ME442 or Megasquirt will enable you to run more boost without suffering from spark blow-out which tends to happen on the stock MX5 coil packs. You will also be able to run Sequential fire of the plugs, instead of the wasted spark setup usually ran. These kits are tried and tested on all of our forced induction MX5’s, ranging from 200 to 350BHP
All our kits are Tesa taped and insulated to protect the wiring and your rocker covers.


So what does our kit include:
Aluminium Coil Pack mounting plate.

Associated mounting hardware

Wired Pig Tails for coil packs.

Ground eyelet for valve cover.

Installation Instructions.

Coils Used

Unlike most kit’s in the UK our’s is pre-wired, all you will need to decide on is which fire-mode you want to run, and connect the trigger/Power and Ground wires accordingly. Our provided instructions will go through all of this for you, we are also happy to assist in all installs.
Also unlike other kits we have included tach wires for ALL Coil packs if you need them, if not required then leave these disconnected.
We do advise you run an aftermarket ECU that is able to run these types of coils, it is possible for the stock ECU to run them but you will need to reduce the dwell time. On aftermarket ECU’s be sure to lower your Dwell to 2.5ms at 12v.

£150 + Free UK Shipping.

Save this product for later